Bambu Studio workflow
How to add base support in Bambu Studio depends on whether you need a temporary support surface, a permanent pedestal, or a separate add base 3d model. Use the workflow that matches your print goal, then inspect the contact area before slicing.
Choose your route
A base can stabilize a model, improve bed contact, or become part of the finished object. Treating those goals as the same add base 3d model task often creates extra material, awkward seams, or a base that does not fit the plate.
Pick one workflow before editing the file. Each path handles the add base 3d model differently, so the right choice is more important than adding detail too early.
For a model that only needs stability, create a shallow add base 3d model with a flat underside and enough area to stay on the plate. Keep the footprint wider than the narrowest contact point, but avoid covering details that need to remain visible.
For display pieces, shape the add base 3d model as part of the final object. A round, square, or stepped pedestal can make the transition intentional, while a small bevel can reduce a harsh edge where the model meets the base.
When the base needs a precise fit, create or revise the add base 3d model before opening the slicer. Import the combined file into Bambu Studio, orient the assembly, confirm the underside is flat, and inspect the first layers in preview.
These examples show where a Bambu Studio base support workflow is useful. Each scenario links to a related guide so you can move from the use case to the right add base 3d model method.
A narrow-footed character rocks on the build plate and needs a discreet stabilizing surface.
A shallow oval or round add base 3d model keeps the figure upright without turning the support into the visual focus.
add base 3d model examplesA small enclosure or product mockup needs a flat presentation surface for a test print.
A square plinth gives the add base 3d model a predictable underside and makes orientation easier in Bambu Studio.
add base 3d model tutorial for beginnersA detailed miniature has limited contact with the plate and is vulnerable during the first layers.
A compact stepped base can improve stability while preserving the visible silhouette of the add base 3d model.
how to add base to 3d printThe base is not temporary support; it is part of the finished object and should look designed.
A beveled pedestal turns the add base 3d model into a display element that can be checked as one assembly in Bambu Studio.
add base 3d model alternativeUse this comparison to decide whether the base belongs in the slicer workflow or in the model itself. The best add base 3d model is the one that matches the intended print and remains easy to inspect.
Primary purpose
Temporary Bambu Studio support
Improve stability during printing
Integrated add base 3d model
Become part of the finished object
Where the decision starts
Temporary Bambu Studio support
Inside the Bambu Studio preparation workflow
Integrated add base 3d model
In the model geometry before import
Best for
Temporary Bambu Studio support
Short-term support under difficult contact areas
Integrated add base 3d model
Figurines, prototypes, and display pieces
Visual finish
Temporary Bambu Studio support
May leave a support interface or cleanup area
Integrated add base 3d model
Can use a planned transition, bevel, or step
Revision control
Temporary Bambu Studio support
Quick to adjust for a particular plate setup
Integrated add base 3d model
More consistent across repeated prints
Final inspection
Temporary Bambu Studio support
Check support placement and previewed layers
Integrated add base 3d model
Check watertight joins, underside flatness, and proportions
Material impact
Temporary Bambu Studio support
Support material is intended to be removed
Integrated add base 3d model
Base material remains in the final add base 3d model
Version awareness
Temporary Bambu Studio support
Menu names and support controls may vary by Bambu Studio version
Integrated add base 3d model
Geometry remains inspectable independently of slicer labels
Describe the model, the base shape, and the intended use to begin an add base 3d model workflow. After handoff, review the geometry in Bambu Studio, confirm the base sits correctly on the plate, and check the sliced layers before printing.
Create base modelChoose whether the base is temporary support or part of the final model. For a permanent base, prepare the add base 3d model, import it into Bambu Studio, orient the underside to the plate, and inspect the sliced preview.
Bambu Studio can be used to prepare a model for support and slicing, but the exact base geometry may need to be created before import. If the base is part of the finished object, treat it as an add base 3d model rather than relying only on removable support.
The workflow is to define the print goal, choose a support footprint or integrated pedestal, place the model on the plate, and review the first layers in preview. Check that the add base 3d model does not block important details or extend beyond the intended bed area.
For a display model, make the base part of the geometry so its proportions and transition can be inspected before slicing. A round, square, oval, or stepped add base 3d model can then be oriented in Bambu Studio as one assembly.